BMW 700 y RS
BMW 700 y RS
Les dejo este articulo sacado de la web
The BMW 700 was produced from 1959 through 1965 with 180,000 examples being produced. It was based on the BMW 600, which had been based on the Isetta. The 2-cylinder, air-cooled engine was courtesy of the BMW R67 motorcycle and stored in the rear of the vehicle. The vehicle could be purchased in either coupe or cabriolet configuration.
Throughout its production lifespan, the engine would receive modifications which boosted the overall horsepower. These modifications included shorter air-intake manifolds and Solex carburetors.
Giovanni Michelotti was responsible for the design of the 700. Michelotti is well known throughout the automotive design industry, especially for his work with the Triumph Herald.
A competition version, dubbed the 700 RS, was created for racing. The engine was tuned to 70 PS (about 73 horsepower) and the body was modified to reduce weight and improve aerodynamics. Hans Stuck and Jacky Ickx are two of the more popular racers who successfully campaigned the 700 RS at many sporting events. The highlight of the 700 RS career was in 1960, driven by Stuck, were it was success in capturing the German Hill Climb Championship. In total, around 22 International victories were achieved in rallies, hill climbs, and touring car races. Only 19 examples of the 700 RS were created.
In 1962 a longer wheel base model was introduced and the name was changed to the BMW LS. In 1963 the name was changed again to the 700 CS.
The 700 continued BMW's pre-WWII tradition of producing small, fuel efficient, people movers. For the price, the 700 was a well designed and economical car and in competition form, was fairly potent. Due to the configuration of the engine and lightweight design, the 700 were nimble and offered superb handling. Although not powerful, they could easily keep pace with much more powerful vehicles on the road. The biggest accomplishment of the 700 was to help the BMW Company in its quest for financial stability.
The BMW 700 was produced from 1959 through 1965 with 180,000 examples being produced. It was based on the BMW 600, which had been based on the Isetta. The 2-cylinder, air-cooled engine was courtesy of the BMW R67 motorcycle and stored in the rear of the vehicle. The vehicle could be purchased in either coupe or cabriolet configuration.
Throughout its production lifespan, the engine would receive modifications which boosted the overall horsepower. These modifications included shorter air-intake manifolds and Solex carburetors.
Giovanni Michelotti was responsible for the design of the 700. Michelotti is well known throughout the automotive design industry, especially for his work with the Triumph Herald.
A competition version, dubbed the 700 RS, was created for racing. The engine was tuned to 70 PS (about 73 horsepower) and the body was modified to reduce weight and improve aerodynamics. Hans Stuck and Jacky Ickx are two of the more popular racers who successfully campaigned the 700 RS at many sporting events. The highlight of the 700 RS career was in 1960, driven by Stuck, were it was success in capturing the German Hill Climb Championship. In total, around 22 International victories were achieved in rallies, hill climbs, and touring car races. Only 19 examples of the 700 RS were created.
In 1962 a longer wheel base model was introduced and the name was changed to the BMW LS. In 1963 the name was changed again to the 700 CS.
The 700 continued BMW's pre-WWII tradition of producing small, fuel efficient, people movers. For the price, the 700 was a well designed and economical car and in competition form, was fairly potent. Due to the configuration of the engine and lightweight design, the 700 were nimble and offered superb handling. Although not powerful, they could easily keep pace with much more powerful vehicles on the road. The biggest accomplishment of the 700 was to help the BMW Company in its quest for financial stability.
- Freude Am Fahren
- Principiante
- Mensajes: 130
- Registrado: Lun Ene 28, 2008 10:43 am
- Freude Am Fahren
- Principiante
- Mensajes: 130
- Registrado: Lun Ene 28, 2008 10:43 am
- Tato
- Maestro
- Mensajes: 2494
- Registrado: Lun Jul 23, 2007 3:26 pm
- Ubicación: Montevideo, Uruguay
- Contactar:
Según un "blog", en Argentina se fabrico localmente este coche, por medio de una metalurgia, rebautizándolo como "De Carlo 700"
transcribo parte del blog
La empresa Metalmecánica S.A.S.I., empresa argentina que fabricó motos de pequeña cilindrada en los años cincuenta. En 1959 llega a un acuerdo con la fabrica alemana BMW para fabricar su nuevo modelo 700 bautizado con el nombre De Carlo 700
Las prestaciones según el "blog"
Características técnicas De Carlo 700
Motor Dos cilindros opuestos refrigerado por aire
Cilindrada: 697 cm3
Diámetro x carrera: 78 x 73
Relación de compresión: 7.50:1
Potencia: 35 HP a 5000 RPM
Transmisión
Trasera. Caja manual 4 marchas sincronizadas
Suspensión
Delantera: independiente paralelogramo deformable longitudinal.Resortes helicoidales y amortiguadores.
Trasera: independiente, brazos simples arrastrados, resortes helicoidales y amortiguadores hidráulicos
Prestaciones
Velocidad máxima: 125 Km/h
Carrocería: Autoportante soldada a chasis
Frenos: Hidráulicos autoconcentrantes
Dimensiones (mm)
Largo: 3540
Ancho: 1480
Alto: 1345
Distancia entre ejes: 2120
Trocha delantera: 1270
Trocha trasera: 1200
Alguien sabe mas al respecto de esto ?
Pueden entrar al "blog" aquí
Salute!
transcribo parte del blog
La empresa Metalmecánica S.A.S.I., empresa argentina que fabricó motos de pequeña cilindrada en los años cincuenta. En 1959 llega a un acuerdo con la fabrica alemana BMW para fabricar su nuevo modelo 700 bautizado con el nombre De Carlo 700
Las prestaciones según el "blog"
Características técnicas De Carlo 700
Motor Dos cilindros opuestos refrigerado por aire
Cilindrada: 697 cm3
Diámetro x carrera: 78 x 73
Relación de compresión: 7.50:1
Potencia: 35 HP a 5000 RPM
Transmisión
Trasera. Caja manual 4 marchas sincronizadas
Suspensión
Delantera: independiente paralelogramo deformable longitudinal.Resortes helicoidales y amortiguadores.
Trasera: independiente, brazos simples arrastrados, resortes helicoidales y amortiguadores hidráulicos
Prestaciones
Velocidad máxima: 125 Km/h
Carrocería: Autoportante soldada a chasis
Frenos: Hidráulicos autoconcentrantes
Dimensiones (mm)
Largo: 3540
Ancho: 1480
Alto: 1345
Distancia entre ejes: 2120
Trocha delantera: 1270
Trocha trasera: 1200
Alguien sabe mas al respecto de esto ?
Pueden entrar al "blog" aquí
Salute!
BMW E21 316/1 1980.
BMW E36 325i 1993
BMW 310 GS 2018
BMW E36 325i 1993
BMW 310 GS 2018
- Freude Am Fahren
- Principiante
- Mensajes: 130
- Registrado: Lun Ene 28, 2008 10:43 am
- emap_y2k
- Principiante
- Mensajes: 29
- Registrado: Mar Sep 25, 2007 11:04 am
- Ubicación: La Plata, ARG
- Contactar:
Si es real en Argentina se hacian con el nombre De Carlo 600 y 700 los dos modelos de BMW. Hoy por hoy es muy dificil ver algunos (el plan canje de autos en los noventa, acabo con muchos clasicos....)
Les dejo algunos links
http://www.auto-historia.com.ar/Histori ... storia.htm
http://www.cocheargentino.com.ar/d/de_carlo.htm
Si quieren comprar uno...
http://articulo.mercadolibre.com.ar/MLA ... lamour-_JM
Saludos....
PD: yo tambien quiero ver esas fotos del museo BMW!
Les dejo algunos links
http://www.auto-historia.com.ar/Histori ... storia.htm
http://www.cocheargentino.com.ar/d/de_carlo.htm
Si quieren comprar uno...
http://articulo.mercadolibre.com.ar/MLA ... lamour-_JM
Saludos....
PD: yo tambien quiero ver esas fotos del museo BMW!
E21 320/6 Ascot Grey metallic Nacido el 3/11/80
- martin 316
- Maestro
- Mensajes: 1979
- Registrado: Mar Nov 23, 2010 9:41 pm